Initial commit. Lab 1.1.4

september/lab-1.1.4.md

@@ -0,0 +1,45 @@
+# 1.1.4 Packet Tracer - Create Realistic Structured Cabling in the Physical Workspace and Cabling Devices in a Rack
+
+## Objectives
+
+In this activity, you will install a patch panel and a wall mount. You will then use these to connect network devices in the office to the equipment in the wiring closet.
+
+- Part 1: Install a Patch Panel in the Wiring Closet
+- Part 2: Attach a Wall Mount in the Office
+- Part 3: Connect an Additional Wall Mount and Cables
+
+## Required Resources
+
+- Latest Packet Tracer version
+
+## Procedure
+
+### Part 1: Install a Patch Panel in the Wiring Closet
+
+- Step 1: Install a patch panel in the Rack;
+  
+  ![Figure 1 – Installing a patch panel in the Rack](./assets/lab-1.1.4-1.png)
+
+- Step 2: Connect the Office-SW1 to the patch panel.
+
+  ![Figure 2 – Connecting the Office switch to the Patch panel](./assets/lab-1.1.4-2.png)
+
+### Part 2: Attach a Wall Mount in the Office
+
+- Step 1: Install a wall mount;
+
+  ![Figure 3 – Installing a wall mount](./assets/lab-1.1.4-3.png)
+
+  ![Figure 4 – Verifying connection from Office-Admin by opening a website](./assets/lab-1.1.4-4.png)
+
+- Step 2: Organize the cables.
+
+  ![Figure 5 – Orginizing the cables](./assets/lab-1.1.4-5.png)
+
+### Part 3: Connect an Additional Wall Mount and Cables
+
+  ![Figure 6 – Connecting additional cables betweed the Office switch and the Patch panel](./assets/lab-1.1.4-6.png)
+
+  ![Figure 7 – Connecting to the Wall mount and managing cables](./assets/lab-1.1.4-7.png)
+
+  ![Figure 8 – Verifying connection from Office-User by opening a website](./assets/lab-1.1.4-8.png)